July 11, 2025
KN 63 100 Watts
200 Channel Remote DME System
Using LSI Circuit Technology
KN63 DME Receiver
BendixKing's DME Solutions for General Aviation
DME(Distance Measuring Equipment), It consists of an airborne interrogator and a ground transponder. Its working principle is: the airborne rangefinder transmits a pair of interrogation pulse signals, and the ground beacon station generates a corresponding response pulse signal and transmits it at different frequencies after receiving the interrogation signal. After receiving the ground RF pulse signal, the airborne rangefinder can calculate the distance between the aircraft and the ground rangefinder station based on the time delay between the interrogation pulse and the response pulse.
DME measures diagonal distance rather than horizontal distance. When the aircraft's flight altitude is much smaller than the slant distance to the control console, the slant distance measured by the DME can be regarded as the horizontal distance from the aircraft to the control console. DME operates in the UHF band, frequency range: 962-1213 MHz. The effective coverage range of DME is 200NM. Within the effective coverage range, the system's ranging error is no more than 0.5NM. ICAO stipulates that DME can provide distance information for up to 100 aircraft.
Only the BendixKing Silver Crown KN 63 gives you so many high-performance DME features in a compact, low-cost package. The TSO-certified KN 63 is a complete 100-watt, 200-channel remote DME system that uses the latest state-of-the-art Large Scale Integration (LSI) circuit technology. The KN 63 offers significant advantages in DME reliability and performance, is all solid-state (no transmitter tubes), and can be installed with single or dual panel indicators.
Ranges up to 389 nautical miles (within visual range), ground speeds up to 999 knots and time-to-station times up to 99 minutes are digitally calculated and displayed simultaneously on the KDI 574 panel display. Lock-on range is almost instantaneous (typically within one second), and accurate land speed and time-to-station readings are obtained in less than a minute.
Advanced technology has reduced the size and cost of such remote DME systems.
Technical Parameters
SOON
Rated Voltage: 11-33 VDC at 17 watts max. |
||
Maximum Height: 50,000ft. |
||
Size: 11.55(L)x1.18(W)x6.50(H) in. |
||
Weight: 2.8 lbs. (1.27 kg) |
||
Specification: TSO-C66a |
KN63 DME Is Now In Stock
【Recent Recommendations】